uPVC doors
Why your uPVC door will not lock properly
By Michael · Published 28 September 2026
If you have to lift the handle hard, lean on the door, or jiggle the key before a uPVC door will lock, the door is telling you something. Catching it early is the difference between an adjustment and a mechanism replacement.
The usual cause: the door has dropped
A uPVC or composite door is heavy and hangs on hinges that gradually settle. When the door drops a few millimetres, the hooks and rollers on the multipoint strip no longer line up with their keeps in the frame. You compensate by lifting the door with the handle — and every time you do that, the gearbox inside takes load it was never designed for.
The failure that follows
- Handle lifts but the key will not turn: the gearbox is failing or has failed.
- Handle flops with no resistance: the gearbox has broken internally.
- Handle is stiff only when the door is closed: alignment, not the lock.
- Key turns but nothing engages: the strip or a connecting part has broken.
What can be adjusted, and what cannot
Alignment is adjustable. Most uPVC hinges allow movement in two or three directions, and the keeps in the frame can often be moved as well. A failed gearbox is not repairable in any sensible sense — it is replaced, and the replacement has to match the backset, the handle centres and the lock type.
Do not leave it locked out of the house
If the door is still working but feels wrong, get it looked at while you can still lock it. The same job done as an emergency, at night, with the door jammed shut, is a longer and more expensive visit.
